3D Printing & Design
Equipment
![3d-printer2 3d-printer2](/content/makers/home/about/3d-printing/_jcr_content/par/image.img.png/1468442912882.png)
![objet-3d-printer2 objet-3d-printer2](/content/makers/home/about/3d-printing/_jcr_content/par/image_382632861.img.jpg/1468442959463.jpg)
![mojo-printer2 mojo-printer2](/content/makers/home/about/3d-printing/_jcr_content/par/image_512266068.img.jpg/1468443038942.jpg)
![3d-scanner2 3d-scanner2](/content/makers/home/about/3d-printing/_jcr_content/par/image_471875382.img.jpg/1468443081719.jpg)
Equipment: (5) Printrbot Simple Metal printers
Location: Peery Makerspace
Equipment: (1) Objet 24 3D printer, VeroWhitePlus photo polymer, 9.45” x 7.87” x 5.9”
Location: Department of Design Make Lab
Equipment: (1) Stratasys Mojo 3D printer, ABSplus thermoplastic, 5” x 5” x 5” build area
Location: Department of Design Make Lab
Equipment: (1) NextEngine Ultra-HD scanner
Location: Peery Hall Makerspace
![graphics-workstation2 graphics-workstation2](/content/makers/home/about/3d-printing/_jcr_content/par/image_876446947.img.jpg/1468443179901.jpg)
![pcs2 pcs2](/content/makers/home/about/3d-printing/_jcr_content/par/image_1049695727.img.jpg/1468443443817.jpg)
Equipment: (1) Graphics Workstation
Location: Peery Makerspace
Equipment: PCs
Locations: Peery Makerspace, New Media Center
FAQs
Is there any cost to use the 3D printers?
No, there is no charge for use for most projects. If a project requires an unusually large amount of consumable materials, a fee may be assessed.
Who has access to the 3D printers?
Anyone on campus, students, staff or faculty, can use the 3D printers for projects. Some Makerspaces require appointments or have limited hours so please check the Makerspace where the needed equipment is located.
Is there any training available for the 3D printers?
Faculty and students will offer periodic workshops and training. These workshops will be open to the entire campus community.