Electronics
![soldering-station2 soldering-station2](/content/makers/home/about/electronics/_jcr_content/par/image.img.jpg/1468442641621.jpg)
![breadboards2 breadboards2](/content/makers/home/about/electronics/_jcr_content/par/image_402655689.img.jpg/1468442724441.jpg)
![leds2 leds2](/content/makers/home/about/electronics/_jcr_content/par/image_665219337.img.jpg/1468442817127.jpg)
![resistors2 resistors2](/content/makers/home/about/electronics/_jcr_content/par/image_1786554935.img.jpg/1468442841782.jpg)
Equipment: Soldering Stations
Location: Peery Makerspace
Equipment: Breadboards
Location: Peery Makerspace
Equipment: LEDs
Location: Peery Makerspace
Equipment: Resistors
Location: Peery Makerspace
![wire2 wire2](/content/makers/home/about/electronics/_jcr_content/par/image_548954951.img.jpg/1468442993234.jpg)
![general-electronics2 general-electronics2](/content/makers/home/about/electronics/_jcr_content/par/image_1127963842.img.jpg/1468443060972.jpg)
Equipment: Wire
Location: Peery Makerspace
Equipment: General electronics parts
Location: Peery Markerspace
FAQs
IS THERE ANY COST TO USE this equipment?
No, there is no charge for use for most projects. If a project requires an unusually large amount of consumable materials, a fee may be assessed.
WHO HAS ACCESS TO This equipment?
Anyone on campus, students, staff or faculty, can use this equipment for projects. Some Makerspaces require appointments or have limited hours so please check the Makerspace where the equipment is located.
IS THERE ANY TRAINING AVAILABLE FOR this equipment?
Faculty and students will offer periodic workshops and training. These workshops will be open to the entire campus community.